Product ID:S/G LATEX HI-HIDE WHITE & BASE
MSDS Date:10/21/1987
FSC:8010
NIIN:00N024847
MSDS Number: BMGJK

PRESERVATIVE PAINT CO

5400 - 5410 AIRPORT WAY SOUTH
SEATTLE, WA 98108
US

Emergency Phone: 206-526-2121; 206-634-5252

Info Phone: 206-763-0300

Cage: 86589

PRESERVATIVE PAINT CO

80387 SEATTLE, WA 98108-1726 US

Cage: 86589

ETHYLENE GLYCOL

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL 50 PPM, C

ACGIH TLV: 50 PPM, C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

ALUMINUM SILICATE

CAS: 1318-74-7

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

ISOPROPYL ALCOHOL

CAS: 67-63-0

RTECS: NT8050000

OSHA PEL 400 PPM;500 PPM STEL

ACGIH TLV: 400 PPM;500 PPM STEL

MERCURY, (ACETATO) PHENYL-; (PHENYLMERCURIC ACETATE)

CAS: 62-38-4

RTECS: OV6475000

ACGIH TLV: 0.05 MG/M3 (MFR)

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

AMMONIUM HYDROXIDE

CAS: 1336-21-6

RTECS: BQ9625000

ACGIH TLV: 100 PPM (MFR)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRITATION OR BURNING
OF EYES. IF INGESTED MAY CAUSE GI DISTRESS. CHRONIC: RPTD/PRLNG
LIQUID CONTACT MAY CAUSE SKIN IRRITATION W/DISCOMFORT & DERMATITIS.
INHAL: NOT NORMALLY A HAZARD UNLESS SPRAYED, THEN OVERSPRAY &
SPRAY MISTS ARE PRIMARILY CONSIDERED NUISANCE DUST. PIGMENTS ARE
NOT (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: NORMALLY CONSIDERED HAZARDOUS WHEN
PRESENT IN A PRODUCT MIXTURE.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS INVOLVING
SKIN DISORDERS.

First Aid:INHAL: REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTF RESP,
PREFERABLY MOUTH-TO-MOUTH. IF BRTHG DFCLTY PERSISTS/OCCURS LATER,
CONSULT AN MD. EYES: IMMED FLUSH W/PLENTY OF WATER FOR AT LEAST 15
MIN. CALL MD. SKIN: WASH W/SOAP & WATER. IF IRRIT OCCURS, CONTACT
AN MD. INGEST: IN THE UNLIKELY EVENT OF INGESTION, CALL MD
IMMEDIATELY.

Flash Point Method:TCC
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . COOL CLOSED CONTAINERS WITH WATER FOG TO
PREVENT PRESSURE BUILDUP.
Unusual Fire/Explosion Hazard:NONE REASONABLY FORESEEABLE.

Spill Release Procedures:VENTILATE AREA. PREVENT SKIN CONTACT &
BREATHING OF VAPOR. CONFINE AND REMOVE WITH INERT ABSORBANT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:OBSERVE LBL PREC. KEEP CLOSURES TIGHT
WHEN NOT IN USE. STORE IN UPRIGHT POSITION TO PVNT LEAKAGE. WASH
THORO AFTER HANDLING, BEFORE EATING & SMOKING.
Other Precautions:DO NOT STORE ABOVE 120F. KEEP/STORE OUT OF REACH OF
CHILDREN. MAINTENANCE PERS: CONTRS OF THIS MATL MAY BE HAZ WHEN
EMPTIED. SINCE EMPTY CONTRS RETAIN RESIDUES, ALL HAZ PREC MUST BE
OBSERVED. WHEN SPR AYING THIS MATL, KEEP SPRAY (SUPP DATA)

Respiratory Protection:FOR BRUSH & ROLLER APPLICATION, RESPIRATORY
PROTECTION IS NOT NORMALLY REQUIRED. FOR SPRAY APPLICATION, A
PROPERLY FITTED VAPOR/PARTICULATE NIOSH/MSHA APPROVED RESPIRATOR IS
RECOMMENDED.
Ventilation:LOC EXHST/MECH (GEN): SUFFICIENT IN PATTERN & VOLUME TO
KEEP VAPORS BELOW APPLICABLE REQUIREMENTS.
Protective Gloves:SOLVENT IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:COVERALLS ARE RECOMMENDED. SAFETY SHOWER &
EYE BATH.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE. WASH
THOROUGHLY AFTER HANDLING, BEFORE EATING AND SMOKING.
Supplemental Safety and Health
OTHER PREC: BOOTH CLEAN. AVOID BUILDUP OF SPRAY DUST OR OVERSPRAY IN
BOOTH OR DUCTS. DO NOT SAND, FLAME CUT, BRAZE OR WELD DRY COATING
WITHOUT NIOSH/MSHA APPRVD RESPIRATOR OR APPROP VENTILATION.

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:23
Vapor Density:1.3
Spec Gravity:1.2
Evaporation Rate & Reference:0.2 (BUTYL ACETATE = 1)
Solubility in Water:MODERATE
Appearance and Odor:MILKY WHITE & CLEAR TO VARIOUS COLORS WITH A FAINT
AMMONIA ODOR.
Percent Volatiles by Volume:65

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:DO NOT ALLOW MATL TO CONTAMINATE GROUND WATER
SYSTEMS. ABSORB LARGE SPILLS W/INERT ABSORBANT MATL. INCINERATE OR
DISPOSE ABSORBED MATL I/A/W FEDERAL, STATE, AND LOCAL REQUIREMENTS.
DO NOT INCINERATE I N CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.